[ecasound] more problems

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: [ecasound] more problems
From: Jeremy Hall (jhall@uu.net )
Date: Thu Nov 18 1999 - 22:18:08 EET


Hi,

more problems.

ecasound ('h' for help)> c-name scifi
(eca-controller) Warning! This operation requires that chainsetup is
disconnected. Temporarily disconnecting...
- [ Controller/Processing stopped ]
----------------------------------------
- [ Engine/Exiting ]
-------------------------------------------------------
(eca-controller) Disconnecting chainsetup: "command-line-setup".
- [ Closing chainsetup "command-line-setup" ]
------------------------------
(eca-chainsetup) Closing audio device/file "/tmp/in.raw".
(eca-chainsetup) Closing audio device/file "/tmp/out-peppy.raw".
(eca-chainsetup) Opening "/tmp/in.raw" for reading.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-chainsetup) Opening "/tmp/out-peppy.raw" for reading and writing.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-controller) Connected cchainsetup: "command-line-setup".
- [ Controller/Processing started ]
----------------------------------------
- [ Engine/Initializing ]
--------------------------------------------------
- [ Engine/Mixmode "simple iactive" selected ]
-----------------------------
ecasound ('h' for help)> -efr:1000,1000
(eca-controller) Warning! This operation requires that chainsetup is
disconnected. Temporarily disconnecting...
- [ Controller/Processing stopped ]
----------------------------------------
- [ Engine/Exiting ]
-------------------------------------------------------
(eca-controller) Disconnecting chainsetup: "command-line-setup".
- [ Closing chainsetup "command-line-setup" ]
------------------------------
(eca-chainsetup) Closing audio device/file "/tmp/in.raw".
(eca-chainsetup) Closing audio device/file "/tmp/out-peppy.raw".
- [ Chainsetup/Adding chain operator "Bandreject filter" ]
-----------------
Setting parameters: center-freq = 1000.00, width = 1000.00
(eca-chainsetup) Opening "/tmp/in.raw" for reading.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-chainsetup) Opening "/tmp/out-peppy.raw" for reading and writing.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-controller) Connected cchainsetup: "command-line-setup".
- [ Controller/Processing started ]
----------------------------------------
- [ Engine/Initializing ]
--------------------------------------------------
- [ Engine/Mixmode "simple iactive" selected ]
-----------------------------
ecasound ('h' for help)> -efb:1000,1000
(eca-controller) Warning! This operation requires that chainsetup is
disconnected. Temporarily disconnecting...
- [ Controller/Processing stopped ]
----------------------------------------
- [ Engine/Exiting ]
-------------------------------------------------------
(eca-controller) Disconnecting chainsetup: "command-line-setup".
- [ Closing chainsetup "command-line-setup" ]
------------------------------
(eca-chainsetup) Closing audio device/file "/tmp/in.raw".
(eca-chainsetup) Closing audio device/file "/tmp/out-peppy.raw".
- [ Chainsetup/Adding chain operator "Bandpass filter" ]
-------------------
Setting parameters: center-freq = 1000.00, width = 1000.00
(eca-chainsetup) Opening "/tmp/in.raw" for reading.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-chainsetup) Opening "/tmp/out-peppy.raw" for reading and writing.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-controller) Connected cchainsetup: "command-line-setup".
- [ Controller/Processing started ]
----------------------------------------
- [ Engine/Initializing ]
--------------------------------------------------
- [ Engine/Mixmode "simple iactive" selected ]
-----------------------------
ecasound ('h' for help)> cop-status
- [ Controller/Chain operator status ]
-------------------------------------
Chain "default":
        1. Bandreject filter: [1] center-freq 1000.00, [2] width 1000.00
        2. Bandpass filter: [1] center-freq 1000.00, [2] width 1000.00

ecasound ('h' for help)> cop-remove 1
(eca-controller) Warning! This operation requires that chainsetup is
disconnected. Temporarily disconnecting...
- [ Controller/Processing stopped ]
----------------------------------------
- [ Engine/Exiting ]
-------------------------------------------------------
(eca-controller) Disconnecting chainsetup: "command-line-setup".
- [ Closing chainsetup "command-line-setup" ]
------------------------------
(eca-chainsetup) Closing audio device/file "/tmp/in.raw".
(eca-chainsetup) Closing audio device/file "/tmp/out-peppy.raw".
(eca-chainsetup) Opening "/tmp/in.raw" for reading.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-chainsetup) Opening "/tmp/out-peppy.raw" for reading and writing.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-controller) Connected cchainsetup: "command-line-setup".
- [ Controller/Processing started ]
----------------------------------------
- [ Engine/Initializing ]
--------------------------------------------------
- [ Engine/Mixmode "simple iactive" selected ]
-----------------------------
ecasound ('h' for help)> c-remove 2
(eca-controller) Warning! This operation requires that chainsetup is
disconnected. Temporarily disconnecting...
- [ Controller/Processing stopped ]
----------------------------------------
- [ Engine/Exiting ]
-------------------------------------------------------
(eca-controller) Disconnecting chainsetup: "command-line-setup".
- [ Closing chainsetup "command-line-setup" ]
------------------------------
(eca-chainsetup) Closing audio device/file "/tmp/in.raw".
(eca-chainsetup) Closing audio device/file "/tmp/out-peppy.raw".
(eca-controlled) Removed selected chains.
(eca-chainsetup) Opening "/tmp/in.raw" for reading.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-chainsetup) Opening "/tmp/out-peppy.raw" for reading and writing.
(audio-io) Format s16_le, channels 2, srate 44100.
(eca-controller) Connected cchainsetup: "command-line-setup".
- [ Controller/Processing started ]
----------------------------------------
- [ Engine/Initializing ]
--------------------------------------------------

---
(eca-controller) ERROR: [ECA_PROCESSOR] : "Engine startup aborted, session
in corrupted state!"

so I accidentally removed a nonexistant chain-setup (I think)


New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2a24 : Thu Nov 18 1999 - 22:20:25 EET