Subject: Re: [ecasound] the enm effect
From: Kai Vehmanen (firstname.lastname@example.org)
Date: Wed Oct 06 1999 - 22:14:56 EEST
On Wed, 6 Oct 1999, Jeremy Hall wrote:
> I am trying to use the enm effect, but am having trouble determining which
> values t use. The manpage suggests that the first parameter is a
Yes, it's quite hard to find optimal parameters for this effect.
> I tried to run -ev over the part I wanted to be muted, then multiply by a
> hundred and put it in to the parameters, but this resulted in instant
> deactivation of the gate, only allowing peeks that reached 100% through.
Hmm, "-ev" gives the maximum multiplier with which the signal can be
amplified without clipping. So you can't use this value directly.
I often use "-enm:18,20,50,50,50" myself. You'll have to experiment
with this a bit.
-- Kai Vehmanen <email@example.com> -------- CS, University of Turku, Finland . http://www.wakkanet.fi/ecasound/ - linux audio processing . http://www.wakkanet.fi/sculpscape/ - ambient-idm-rock-... mp3/ra/wav
This archive was generated by hypermail 2a24 : Thu Oct 07 1999 - 10:25:26 EEST