Subject: [ecasound] Re: hello
From: Kai Vehmanen (firstname.lastname@example.org)
Date: Mon Sep 20 1999 - 22:21:47 EEST
On Mon, 20 Sep 1999, Kali Griffin wrote:
> name is: /dev/dsp i think
> mode: is si_read
Yes, these are correct.
> fmt: confuses me
This specifies the sample parameters (sample rate, channels, bits,
etc). audioio.h contains the definition for this.
> bsize: is variable, i'll start with 1024
Yes, this specifies the buffersize in samples. Same as ecasound's
> can you help me with this, and can you raise some issues for me to
> consider. the next step in this app is to interface the audio stream with
> audio-fx.cpp, any issues there that are not apparent?
As I mentioned in my earlier post, another way to use libecasound.so
is through ECA_CONTROLLER class. You should see ecatools source files
for more info. Also
...contains some useful info.
Otherwise eca-chainsetup.cpp should prove helpful.
-- Kai Vehmanen <email@example.com> -------- CS, University of Turku, Finland . http://www.wakkanet.fi/ecasound/ - linux audio processing . http://www.wakkanet.fi/sculpscape/ - ambient-idm-rock-... mp3/ra/wav
This archive was generated by hypermail 2a24 : Sat Sep 25 1999 - 19:41:14 EEST